Finally the long awaited update of the Smoke Patch is released. Please go through this post very carefully before installing the patch.
Follow these instructions strictly :
1. As the patch is a full version, it doesn't need previous updates.
2. Make sure you have a clean copy of PES 2014 with data pack 2 installed (compulsory OR Download from the links below & install).
**while installing Datapack from the link above, there will be a 2D league installer automatically opened after the installation of datapack, Please IGNORE that.
3. Download all 10 parts of v6.2 from download links below and extract them to a folder; password is : smoke
4. Then, run SMoKE Patch 2014 v6.2 as administrator.
5. Select your "Pro Evolution Soccer 2014" folder anywhere on your PC.
6. Then click next and start.
7. The installer may have some "Not responding" errors for few seconds, leave and let it respond itself. (on low specifications PC's mostly)
8. After final page is displayed, click exit.
9. Run SMoKE Datapack v6.2 as admin (IT MAY TAKE SOME Minutes TO OPEN)
10. Click next, and start.
11. Again, the installer may not respond some seconds, leave it (for more than 10-15 mins)
12. After end page is displayed, click exit.
13. Run SMoKE 2d Final v6.2 as admin.
14. Select your desirable league, also NO 2d option is added.
15. Click i agree and next.
16. **Make sure you select your "Pro Evolution Soccer 2014" folder **
17. After installing everything correctly, run pes2014.exe as admin.
SMoKE Team 2014
Version 6.2
DOWNLOAD:
Part 1: http://adf.ly/qZhBm
Part 2: http://adf.ly/qZhEJ
Part 3: http://adf.ly/qZhGO
Part 4: http://adf.ly/qZhJM
Part 5: http://adf.ly/qZhMY
Part 6: http://adf.ly/qZhP7
Part 7: http://adf.ly/qZhRg
Part 8: http://adf.ly/qZhTm
Part 9: http://adf.ly/qZhWd
Part 10: http://adf.ly/qZhZ1
Data pack 2:
Part 1: http://adf.ly/qZhd9
Part 2: http://adf.ly/qZhdA
Part 3: http://adf.ly/qZhdB
Part 4: http://adf.ly/qZhdC
Part 5: http://adf.ly/qZhdD
Part 6: http://adf.ly/qZhdE
Part 7: http://adf.ly/qZhdF
NOTE:
1. After downloading these 10 parts, please extract them to a single folder. You'll see three different installers "SMoKE Patch v6.2", "SMoKE Datapack v6.2" and "SMoKE 2D installer v6.2".
2. The "SMoKE Datapack v6.2" and "SMoKE Datapack 2.00" are two different datapacks. You have to install both, First datapack 2.00, and then Datapack v6.2.
3. We're releasing this patch in a hurry, so we couldn't have a sufficient number of BETA test reports. If any errors are found, please do not hesitate to report, we will make small "Hot-fix" updates within the same day.
4. Here's a link to the CREDITS page, and DONATE page.
5. Scoreboard installer will be available very soon.
It's an error of the installer itself. Please try re-installing everything once.
ReplyDeleteit's fine now?
ReplyDeleteyou can do the transfers yourself too, in case they're missed. :)
Hi I have the same error.
ReplyDeleteHow do i solve it?
I have the same issue try to reinstall but its still the same. The game can be run but epl team its not available. Any way to fix it? Thanks
ReplyDeleteTo all the guys who have the problem of not having all the leagues
Deletehere is a simple solution:
install the patch and the datapacks and the 2d installer at any order (it doesn't matter)
after you finish intallation go to this directory inside your pes 2014 folder "\SMoKE\pes14_win_dat\common\etc\pesdb"
and then delete the file named "CompetitionEntry.bin"
now run the game and you will find all the leagues in your game
I have done this several times and it worked !!
How do you get the english teams through this? only got the german league with ireland as the teams haha
ReplyDeleteFile loader not working
ReplyDeleteinstalei tudo de acordo com as vossas indicacões..quando abro o jogo como administrador não aparece estas ligas:liga inglesa, liga francesa, liga italiana, liga holandesa, liga espanhola e liga portuguesa..o instalador da liga 2d diz que foi instalado, mas não aparece a liga instalada.gostaria de saber como reslover isto...obrigado!!!
ReplyDeleteTried reinstalling a few times, eep getting "Cannot create the following file: \SMOKE\GOLD Series\Final 6.2\SMoKE\pes14_win_dat\common\etc\TeamColor.$$A" error.
ReplyDeleteThe install will start but as people said above the English and other leagues are missing.
I'm on Win 7 64 bit.
oi,tambem estava a ter este problema,mas podes seguir estas dicas que pode ajudar...
Delete1-instala o pes 2014 de novo
2- instala data pack 2.,
3-instala data pack 6.2 ,mas não instala a liga 2d dos data pack
4-instala patch 6.2..depois de instalado da este erro:Não é possÃvel criar o seguinte arquivo: \ FUMAÇA \ Série Ouro \ final 6.2 \ SMoKE \ pes14_win_dat \ common \ etc \ TeamColor $ $ A". Erro
5-finaliza a instalação e abra o jogo como administrador e veja si estão todas as ligas instalado,mas pode ter nomes falsos dos jogadores na liga alemanha e equipas classicas.
6-para corrigir estes nomes falsos,..instala a liga 2d 6.2 que queres dentro da pasta save ,que fica na pasta konami nos meus documemtos...finaliza a instalação..
7-agora abra o jogo como administrador e veja si ficou tudo bem..foi assim que eu consegui...espero ter ajudado!!!!
Hi, I'm getting the same error as mentioned above after I followed the instructions to install the patch. I think it may have something to do with the error that is causing the issues with the Emglish and other European leagues
ReplyDeletedo i need to install patch 1.12 and 1.13 before install?
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteEverything installed according to your notes .. but when I open the game as an administrator: There appears THESE leagues: English Premier League, French League, Italian League, Dutch League, Spanish League and Portuguese .. install the installer of league 2d Says that was installed, but the league appears 2d installed. Listing added the stadiums will not appear on the smoke .. I wonder How reslover This or the error is in Smoke Patch 6.2 GOLD ... Thanks!
ReplyDeleteeverything working fine with jenkey loader 1.0.2.9,sweetfx and pes2014fullsettings with frame skipping and vsync
ReplyDeleteI must commend the efforts you guys are putting into making pes2014 a good game.
ReplyDeletePlease do I need to install version 6.1 b4 this one? Or should I just install this on a clean copy of pes2014. I am asking because I have installed this version 6.2 on a clean version of pes2014 but the game appears to be slow despite adjusting the speed with the fileloader. Coetrao still has no head. Lol. Asides the game being a bit slow and the file loader not adjusting the speed, I think I have no other issues.
I just installed the patch and I have some problems. Only a few leagues are showing up, having even fewer teams inside. Only Bundesliga shows up correctly and the National Teams. And when I pick teams the game crashes please help me Smoke Team..!!
ReplyDeletehi, I was also having this problem, but you can follow these tips that can help ...
Delete1-install pes 2014 new
2 - install data pack 2.
3-install data pack 6.2, but installs league of 2d data pack
4-install patch 6.2 .. after installation of this error: Can not create the following file: \ SMOKE \ Gold Series \ Final 6.2 \ SMoKE \ pes14_win_dat \ common \ etc \ TeamColor $ $ The "error.
5-completes the installation and start the game as an administrator and see each other all leagues are installed, but can have false names of the players in the league germany and classical teams.
6-to correct these false names .. 2d 6.2 installs the league you want to save into the folder, which is on the konami folder in my documemtos ... finish the installation ..
7 now open the game as administrator and see itself was okay .. that's how I got ... I have helped.!
thank you very much my friend, I will try this and I'll tell you if it worked :)
DeleteHello again my friend, i tried it like you said and now it starts the game correctly so thank you very much.
DeleteOne last problem though, is that most of the leagues are missing still...do you have any other ideas :/ ?
Hey, is there a way to be able to use File Loader? Plus San Siro has graphical issues with the edges of the field. Really annoying to play there. Thanks in advance
ReplyDeleteinstal Smoke Datapack first then patch,and put jenkey loader 1.0.2.9 in game folder
ReplyDeletecampionato master ogni partita della juventus si blocca tutto e si chiude tutto come nella versione 6.1 è bruttissimo
ReplyDeleteI have the Steam version of PES 2014. Will there be a duplicate copy?
ReplyDeleteI have download all of part but i don't lnow to extract the file, pls tell me about it
ReplyDeleteit works for me normaly..........thx
ReplyDeletestadiums??
ReplyDeletestill no main league except bundesliga
ReplyDeleteTo all the guys who have the problem of not having all the leagues
ReplyDeletehere is a simple solution:
install the patch and the datapacks and the 2d installer at any order (it doesn't matter)
after you finish intallation go to this directory inside your pes 2014 folder "\SMoKE\pes14_win_dat\common\etc\pesdb"
and then delete the file named "CompetitionEntry.bin"
now run the game and you will find all the leagues in your game
I have done this several times and it worked !!
how to complete installation got "cannot create the following file: \smoke\gold win_dat\common\series\final 6.2 ect\teamcolour.$$A"
Deletejust ignore the error message and click exit then delete the mentioned file after installing all the files.
Deletetorrent please
ReplyDeletedata pack 2 freeze at 25%
ReplyDeleteFix the installer error please !
ReplyDeletehi keeps asking for password to run rar extracts
ReplyDeleteWhy national teams have dummy player ? how to fix it
ReplyDeleteCan the download please be simplified! This 10-part download method is nonsense. It is very frustrating to hop from one link/page to another whilst dealing with advertising and pop-ups along the way...all in vain. Can someone tell me how the heck to download this patch. What am I missing here?
ReplyDeleteMy pes2014 keep say pes2014 stopped working after select theteam. Please help.
ReplyDeleteIs there a renewal of the stadiums???????????
ReplyDeleteand mummy or dummy players
Deletepassword to unrar the file
ReplyDeleteThis comment has been removed by the author.
ReplyDeletePlease can you solve this??? ! c:\extract\SMOKE PATCH 6.2\SMoKE_2014_v6.2.part09.rar: CRC failed in the encrypted file SMoKE Datapack v6.2.exe (wrong password ?)
ReplyDelete